Product Description
Options Explained
Colour: There is a limited colour selection but custom colours are available at an extra cost.
Mesh: See the mesh document in the resources. Charcoal insect mesh is the recommended option in most cases.
Track: See documentation below for details on track options and “Installation Type Drawings”. Face fit options are STD & #7. #7 should be used where possible for the top track as it helps with blowout as contains a brush. If face-fit isn’t possible, consider an Aluminium TAC Track Mount from parts and accessories.
Housing: This is the side of the roller when looking at the screen with the roller (housing) protruding towards you. In the product image, the housing is on the “right”.
Location: This is a reference field. e.g Front Door
Width: The exact mm measurement. This can be cut down on-site if needed. We recommend the legacy screen isn’t wider than 1200 mm in breezy areas. The Zipped Wall Screen is suitable for higher winds.
Height: The exact mm measurement. This is difficult to alter.
Handle Height: This is the exact mm measurement from the bottom of the screen to the bottom of the handle.