Product Description
Options Explained
Minimum width for the outdoor roller blind is 650mm.
Colour: There is a limited colour selection but custom colours are available at an extra cost.
Mesh: See the mesh document in the resources. E-Screen 10% or 6% in Charcoal is recommended in most cases.
Track: See the documentation below for details on track options. The recessed track uses a channel fixed through the back of the channel and crocodile teeth allow the mesh to be pushed and locked into the channel. The channel can be recessed or fixed directly on top of a surface.
The standard track pulls apart allowing fixing through the side of the track for face-fit. An angle can be used to reposition the fixings to the back of the track.
Option: Standard motors require standard power and are operated via a remote. They can also be controlled via home automation with the addition of a “Dry Contact Interface” that operates essentially as an extra remote connected to home automation. 4-Wire motors do not use s remote and are instead controlled via an “Up Wire” and a “Down Wire” and can therefore be completely controlled by home automation or switches.
The positioning of the motor inside the housing (left or right) is determined when looking at the screen with the roller/housing protruding towards you.
Housing: Standard housing includes an aluminium casing or cover over the roller. Recessed housing includes the roller only as the patio blind will be recessed into a cavity.
